Please note:
Width measurement is along the gable end (apex). The depth is along the length (door side). Metric sizes shown are actual sizes. Imperial sizes are for reference only. Log cabin sizes are the overall length of the logs, generally 180-200mm larger than the outside of the building. All front roof overhangs are 600mm unless stated otherwise.
We deliver Nationally as shown on the map although there may be some postcode exceptions - please see the list below. We are not able to deliver to any Offshore Locations.
Postcode Exceptions: AB, DD, DT, EX, FK, IV, KW, KY, PA, PH, PL, SA, TQ, TR
Delivery Instructions - Please Note
Our log cabins are delivered on a flat bed lorry and unloaded by crane, you will therefore need to create an appropriate space close to your kerbside for the driver to complete the delivery of the building.
Consideration should be given to the size and weight of the building.If you have restricted access please let us know at the time of ordering.
Our Cabins are made from kiln dried timber which are supplied wrapped with polythene and we suggest that they be covered with a tarpaulin if they are to be stored outside prior to construction.This is to prevent moisture/rain from warping and rotting the timber pror to installation.
All deliveries must be signed for unless confirmation is provided before delivery that the product can be left without a signature. Please see terms and conditions for more details.
Treatment and Maintenance
The performance and lifespan of your garden building is entirely dependent on how you treat and maintain the building. Timber is an organic product and as such it is subject to naturally occurring environmental conditions.
Taking a small amount of time throughout the year to look after the building and tend to any repairs before they become more serious is vital. As with all wooden structures the key to maintaining the building is to ensure that it remains on a firm and level base and protected against moisture penetration.
To help you get the best out of your buildings we have prepared a list of some of the key requirements in maintaining your garden buildings:
LOG CABINS
Settlement
Log Cabins settle within the first few months. Moisture content in the logs will also change with the weather/seasons and with use. This will cause expansion/contraction of the wall logs around the windows and doors (up to 20-25mm). This is a natural occurrence that can be limited by the application of an exterior treatment. Please do not fix anything to the logs that may restrict their movement, such as shelves, etc.
Treatment and Maintenance of your Log Cabin
The performance and lifespan of your Log Cabin is entirely dependent on how you treat and maintain the building. Timber is an organic product and as such it is subject to naturally occurring changes due to different environmental and weather conditions.
Taking a small amount of time throughout the year to look after the building and tend to any repairs before they become more serious is important. As with all wooden structures, the key to maintaining the building is to ensure that it remains on a firm and level base and is protected against moisture penetration.
To help you get the best out of your Log Cabin we have prepared the following key maintenance requirements:
Painting/Preserving your Log Cabin
Apart from the tanalised bearers, all Log Cabins are supplied untreated. It is essential that a high quality water-resistant coating is applied to the exterior of the building immediately after erection to ensure adequate weather protection. Take particular care to thoroughly treat the lower 4 logs all around the building and all the joints and corners, plus the ends of each log. It is very important that all components are well covered and no bare timber is left exposed, including the tops and bottoms of all the doors and windows.
Cuprinol recommend 2 exterior coats. Sadolin or Sikkens are also good outdoor products. Please follow the manufacturers instructions and ask your local decorators merchant for advice. If required, we can recommend one of our approved decorators.
It is also good practice to apply a clear wood preserver such as Cuprinol Clear Wood preserver (minimum of 2 coats) to help protect the timber beforeyou apply the final treatment or paint of your choice. Particularly if you are unable to treat the building immediately after installation. This preserver provides a deep penetrating protection against wood decay, mould and blue-staining fungi. This first preserver treatment should be left to dry for about 3 to 5 days before over-painting (see instructions).
Please allow a few weeks for the external coatings to breathe before applying any paint to the interior of your new cabin – and this must be emulsion paint only.
Treat the building regularly
You should repeat the treatments as per the manufacturers instructions, with care being taken to brush the new coats into all wooden components of the building. It is very important that no bare timber is left exposed, including the tops and bottoms of all doors and windows. Small cracks and knotholes should be filled with good quality brown silicone mastic.
Additional weather-proofing
In exposed locations we suggest you increase weather-proofing by adding a silicone seal to all corner joints and around the windows and doors, ensuring that all of the joints and edges are filled, leaving no bare timber.
General Maintenance of your Log Cabin
Ensure nothing is in contact with your building
Any overhanging tree or hedge growth poses a threat to the building and should be cut back at regular intervals. If a tree branch makes contact with your cabin it may pierce the roofing material and encourage water ingress.
Check and replace any damaged roof
If you do find any damage sustained to your roofing over time, it is essential that you act upon this without delay. Should you discover a rip or tear, we firmly recommend the whole area is stripped from the roof and a new covering of matching material is affixed immediately.
Check your base
You should have already ensured the base was perfectly level prior to assembly and it is important to continually monitor the condition. Any movement of the base under the building can lead to twisting of the timber and a dropping of the doors.
Lubrication and adjustment
All hinges and handles should be regularly lubricated with suitable oil to ensure continued ease of use. To adjust doors and windows, simply unscrew the hinges and realign them as necessary or pack under the building bearers to square up doorway.
